Nothing beats peace of mind this beautiful
GulfSeam™ is a snap-lock, clip system. Similar to the GulfLok™, the snap-lock system does not require any special seaming equipment. The clip system gives more options to float out imperfections in the roof substrate and is often a good choice for installation over existing roof systems. The seam is a thicker, bolder seam, making the panel most suitable for upscale residential and commercial projects.
All measurements are nominal and can vary according to the FL building code.
Available options:
-
OceanGuard™
Saltwater and steel don’t play well together. Beat the elements with an industry-leading warranty that will cover you right up to the edge of the water.
-
Fade Test – PVDF Finishes
See why our PVDF paints are so highly rated. There’s a reason why less than one in five fading claims are on PVDF systems.
Specs
GULFSEAM™ CLIP LOCK METAL ROOFING SPECIFICATIONS
- Colors:
- 20+ Colors of Ultra-Fade-Resistive PVDF & Mill Finish Available
- Coverage:
- 14″,16″ & 18″ Net Coverage*
*All measurements and thicknesses are nominal. - Material:
- 24 Gauge Steel, 0.032 & 0.040 Aluminum*
*All measurements and thicknesses are nominal. - Substrate/Warranty:
- AZ-50/ 35/30 Year Premium Paint Finish
AZ-50 / 40/30 Year Standard Paint Finish
AZ-55 / 25 Year Unpainted Mill Finish Warranty
25 Year OceanGuard™ Salt Water Warranty*
*Available options for OceanGuard™ Coastal Aluminum Roofing Series. - Approvals:
- FL Product Approval No. 16646.2, 16646.3, 16646.5, 11651.10, 11651.11
- Minimum Slope: 2:12*
*For applications on lower slopes, contact Gulf Coast Supply - Substructure:
- 15/32” (min.) Plywood, 1″x4″ SYP Purlins on Plywood